| Physical |
| Length |
452 mm (17.8 in.) |
| Width |
480 mm (18.9 in.) across yoke |
| Height |
740 mm (29.2 in.) maximum731 mm (28.8 in.) head straight up |
| Weight |
31 kg (68.4 lbs.) |
| Minimum center-to-center distance in side-by-side installation |
700 mm (27.6 in.) |
| Dynamic Effects |
| Pre-programmed effects |
Two ranges of FX, independent or synchronized/combined |
| Color mixing |
CMY, independently variable 0 - 100% |
| Color wheel |
6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color |
| Gobo animation |
Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction |
| Rotating gobo wheel |
5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake |
| Iris |
Variable 0 - 100% |
| Zoom |
Motorized |
| Color temperature control |
Variable 3000 - 7000 K |
| Framing |
Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position |
| Frost |
Variable 0 - 100% |
| Dimmer/shutter |
0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout |
| Dimming options |
Choice of four dimming curves |
| Pan |
540° |
| Tilt |
268° |
| Position correction system |
Absolute position monitoring |
| Focus |
Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity |
| Control and Programming |
| Setting and addressing |
Control panel with backlit graphic display and jog wheel or via DMX |
| 16-bit control |
Dimming, rotating gobos, zoom, focus, pan and tilt |
| Movement control options |
Tracking and vector |
| DMX channels |
38 |
| Fixture Identification |
User-settable ID number |
| DMX compliance |
USITT DMX512-A |
| RDM compliance |
ANSI/ESTA E1.20 |
| Transceiver |
Opto-isolated RS-485 |
| Fixture software update |
USB memory device or over DMX link |
| Optics |
| Zoom range |
12° - 48° one-tenth peak (1:4) |
| Light source |
468 W custom Martin LED engine |
| Minimum LED lifetime |
50,000 hours (to >80% luminous output)* |
| *Figure obtained under manufacturer's test conditions |
| Photometric Data |
| Light engine luminous output |
>= 31,500 lumens |
| Fixture luminous output |
9,200 lumens |
| CRI (Color Rendering Index) |
>90 |
| CQS (Color Quality Scale) |
>90 |
| TM-30 Rf (IES TM-30-15 Fidelity Index) |
>90 |
| TM-30 Rg (IES TM-30-15 Gamut Index) |
>98 |
| TLCI (Television Lighting Consistency Index) |
>90 |
| CCT |
3000 K (+/- 250 K) |
| * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient. |
| Construction |
| Housing |
High-impact flame-retardant thermoplastic |
| Color |
Black |
| Protection rating |
IP20 |
| Installation |
| Mounting points |
4 pairs of 1/4-turn locks |
| Location |
Dry location only, must be fastened to surface or structure |
| Orientation |
Any |
| Minimum distance to combustible materials |
0.2 m (8 in.) |
| Minimum distance to illuminated surfaces |
2.0 m (6.6 ft.) |
| Connections |
| AC power input |
Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) |
| DMX and RDM data in/out |
5-pin locking XLR |
| Electrical |
| AC power |
120-240 V AC nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeTypical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 APower Factor: 0.99 @ 120 V / 208 V / ,0.98 @230 V / 240 VTypical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V * Power ConsumptionTypical: 596 W *Idle: 64 W * * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Typical: full output white, no effects moving, regulated fan speed. Idle: no output, no effects moving, regulated fan speed. |
| Thermal |
| Cooling |
Combined convection and forced air (temperature-regulated, low noise, user-definable levels) |
| Maximum ambient temperature (Ta max.) |
40° C (104° F) |
| Minimum ambient temperature (Ta min.) |
5° C (41° F) |
| Maximum surface temperature, steady state, at 40° C ambient |
75° C (167° F) |
| Total heat dissipation (calculated, +/- 10%) |
2000 BTU/hr. |
| Environmental |
| RoHS |
Compliant |
| REACH |
Compliant |
| WEEE |
Compliant |
| Proposition 65 |
Compliant |
| Efficacy (max output) |
16 lm/w |
| LWR* |
297 lm/kg (135 lm/lb) |
| LWR = Lumen-to-Weight Ratio |
| Approvals |
| EU safety |
EN 60598-2-17, EN 62471, EN62493 |
| EU EMC |
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 |
| US safety |
UL 1573 |
| US EMC |
FCC Part 15 Class A |
| Canadian safety |
CSA C22.2 No. E598-2-17 |
| Canadian EMC |
ICES-003 Class A |
| Australia/NZ |
RCM |
| Thailand |
TIS |
| Included Items |
| Two omega brackets with 1/4 turn fasteners for rigging clamp attachment |
| Related Items |
| Martin Companion Cable |
P/N 91616091 |
| Martin Companion Cable (for firmware update over DMX) |
Free download from www.martin.com |
| Accessories |
| Gelframe MAC Encore |
P/N 91001000 |
| Set of Followspot Handles MAC Encore |
P/N 91001001HU |
| Heavy Frost Assy MAC Encore Performance |
P/N 91001002HU |
| SIP Packaging MAC Encore Family |
P/N 91616115HU |
| Static GOBO Wheel MAC Encore Performance |
P/N 91001003 |
| Top Hat MAC Encore Performance |
P/N 91001004 |
| Cables and connectors |
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 |
| *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts |
| Installation hardware |
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007Half-coupler Clamp: P/N 91602005Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 |
| Flightcase |
Two-unit Flightcase for MAC Encore*: P/N 91515048 |
| Verified Third-Party Accessories |
| Beam ControlMAC Encore Performance Top Hat |
P/N City Theatrical2778 |
| Ordering Information |
| MAC Encore Performance WRM EPS (in cardboard box, polystyrene packaging) |
P/N 90234015HU |
| MAC Encore Performance WRM SIP (in cardboard box with SIP foam flightcase insert) |
P/N 90234016HU |
| MAC Encore Performance WRM, white finish, EPS (in cardboard box, polystyrene packaging) |
P/N 90234020HU |