| Physical |
| Length |
375 mm (14.8 in.) |
| Width |
217 mm (8.5 in.) |
| Height |
564 mm (22.2 in.) |
| Weight |
17kg (38.0 lbs) |
| Dynamic Effects |
| Color mixing |
CMY, independently variable 0-100% |
| Color wheel |
9 color filters plus open |
| Beam effects |
Rotating three-facet prism |
| Rotating gobo wheel |
7 gobos plus open, wheel rotation, gobo rotation, indexing and shake |
| Static gobo wheel |
9 gobos plus open, wheel indexing, rotation and shake |
| Iris |
0-100% |
| Zoom |
Motorized |
| Electronic dimming |
0 - 100%, four dimming curve options |
| Electronic shutter effect |
Strobe effect, pulse effects, instant open and blackout |
| Pan |
540°, coarse & fine control and speed |
| Tilt |
260°, coarse & fine control and speed |
| Focus |
Motorized |
| Control and Programming |
| Control options |
DMX |
| Setting and addressing |
Control panel with backlit LCD display |
| 16-bit control |
Dimming, pan and tilt |
| DMX channels |
21 |
| DMX compliance |
USITT DMX512/1990 |
| RDM compliance |
ANSI/ESTA E1.20 |
| Transceiver |
Opto-isolated RS-485 |
| Optics |
| Zoom range |
13° - 28° |
| Light source |
260W LED engine |
| Minimum LED lifetime |
20,000 hours (to >70% luminous output)* |
| Binning |
Tight color and flux binning |
| *Manufacturer´s figure obtained under manufacturer´s test conditions. |
| Photometric Data |
| Light engine luminous output |
20,000 lumens |
| Fixture luminous output |
9,500 lumens |
| CRI (Color Rendering Index) |
>70 |
| Color Temperature |
6,500 K |
| LED refresh rate |
1200 Hz |
| * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient. |
| Construction |
| Housing |
High-impact flame-retardant thermoplastic |
| Color |
Black/White |
| Protection rating |
IP20 |
| Gobos |
| Gobo diameter |
26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.) |
| Maximum image diameter |
19.0 mm (0.75 in.) |
| Gobo thickness, maximum |
1.1mm borosilicate glass |
| Installation |
| Mounting points |
Two quarter-turn brackets for rigging clamps |
| Orientation |
Any |
| Connections |
| AC power in, thru |
Neutrik powerCON TRUE1 |
| DMX data in/out |
3-pin & 5-pin locking XLR |
| Electrical |
| AC power |
100-240 V AC nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modePower Factor: 0.99 @ 120 V / 230 VTypical current draw: 3.1 A @ 120 V , 1.6 A @ 230 V * Power ConsumptionTypical: 374 W * * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Typical: full output white, no effects moving, regulated fan speed. |
| Thermal |
| Cooling |
Forced air (temperature regulated, low noise) |
| Total heat dissipation (calculated, +/- 10% at 230 V, 50 Hz) |
1300 BTU/hr |
| Maximum ambient temperature (Ta max.) |
40° C |
| Minimum ambient temperature (Ta min.) |
0° C |
| Environmental |
| RoHS |
Compliant |
| REACH |
Compliant |
| WEEE |
Compliant |
| Proposition 65 |
Compliant |
| Efficacy (max output) |
30.3 lm/W |
| LWR* |
559 lm/kg (250 lm/lb) |
| LWR = Lumen-to-Weight Ratio |
| Approvals |
| Global CB Certification/IECEE |
IEC 60598-2-17 (IEC 60598-1) |
| EU safety |
EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 |
| EU EMC |
EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547 |
| US safety |
UL 1573 |
| US EMC |
FCC Part 15 Class B |
| Canadian safety |
CSA C22.2 No. 166 |
| Canadian EMC |
ICES-003 Class B, ICES-005 Class B |
| Australia/NZ |
RCM |
| Included Items |
| Power cable, 1.5 m (4.9 ft.) 18AWG/0.75 mm2 without mains plugOmega brackets for rigging clamp attachment |
| Related Items |
| Martin Companion Cable |
P/N 91616091 |
| Martin Companion Software Suite (including firmware uploader) Free download from www.martin.com |
| Accessories |
| Cables, 16 A, for connection to power in chains |
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 |
| Cables, 16 A, for relaying power in chains |
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172 |
| Connectors |
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788 |
| Installation hardware |
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007Half-coupler Clamp: P/N 91602005Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 |
| Ordering Information |
| Martin ERA 300 Profile in cardboard box |
P/N 9025109547 |
| Martin ERA 300 Profile White in cardboard box |
P/N 9025109886 |